INVASIVE VENTILATION

The F&P MR 850 System has a mode for patients with bypassed airways, delivering levels of humidity appropriate for patients with an endotracheal or tracheostomy tube.

Product Codes:

NON-INVASIVE VENTILATION

For patients receiving respiratory gases via a face mask at flow rates that can overwhelm the body’s natural humidification systems, Mask Mode on the MR 850 System delivers levels of humidity at a temperature that can encourage patient compliance.

Product Codes:

OPTIFLOW NASAL HIGH FLOW

Deliver Optiflow™ nasal high flow (NHF) therapy with the F&P 850 System. Studies show NHF can decrease the need for intubation and escalation of care when used for primary respiratory support.

Product Codes:

Evaqua 2 Breathing Circuits

Evaqua technology allows water vapor to diffuse out through the expiratory limb wall before it has an opportunity to condense into liquid water within the circuit limb or the ventilator. MicroCell™ technology in the inspiratory limb helps protect humidity from condensing. The result is an easy-to-use circuit that promotes a closed system and can reduce clinician intervention.

• Minimizes inspiratory and expiratory condensation
• Promotes a closed system
• Minimizes condensate-related ventilator alarms
• Reduces filter wetting
• Decreases circuit maintenance time

MR 850 AirSpiral™ Breathing Circuits

The smoothbore AirSpiral circuits contain integrated heating wires and insulating air pockets that help:

• Reduces inspiratory condensation
• Improves humidity delivery
• Lowers resistance to flow

Other RT-series Breathing Circuits

• Spiral wire technology improves condensate control in varying conditions
• Consistent compliance and low resistance to flow
• Probe-latching design to ensure correct orientation of probe for effective feedback
• Circuit supplied preassembled
• Lightweight and flexible

Neopuff product features:

• 21% to 100% oxygen levels
• The Neopuff resuscitator can deliver oxygen levels ranging from 21% to 100% from a flow meter or blender.
• PIP control and pressure relief valve
• The resuscitator has a PIP control and a maximum pressure relief valve that prevents the accidental delivery of excessively high pressures.
• Medical-quality manometer
• Neopuff features an accurate, easy-to-read, medical-quality manometer. It can be mounted on a pole, rail, wall, infant warmer, or incubator.

Features:

The F&P Optiflow™ Junior 2+ nasal cannula has been designed to fit a wider range of patients, bridging the gap between the XL Optiflow Junior 2 cannula and the small Optiflow+ cannula. It retains all the existing benefits of the Optiflow Junior 2 cannula range, including F&P Waveflex™ technology to assist with prong stability and F&P Wigglepads™ 2 to allow for easy application, adjustment and maintenance of the cannula.
Nasal high flow (NHF) offers a range of benefits compared with standard oxygen therapy, and there are several mechanisms of action associated with this treatment, including airway hydration and the reduction of anatomical dead space.

Wide range of sizes and flow ranges. Optiflow Junior 2 offers a variety of five cannula sizes with wide flow ranges to provide respiratory support for even the smallest of patients.

Optiflow Junior 2 Ventilator Transition Kit

This kit allows patients to receive NHF therapy for postextubation support without having to change the invasive circuit. The ability to keep the invasive circuit in place promotes easy NHF trialing.


Sizes: XS, S, M, L, XL

Optiflow Junior 2 Ventilator Transition Kit

This kit allows patients to receive NHF therapy as an alternative to prolonged continuous positive airway pressure (CPAP) therapy – without changing the CPAP circuit.

Sizes: XS, S, M, L, XL

Non-vented mask, compatible with single-limb circuits, requring exhalation port
An anti-asphyxiation valve for safety in case of ventilator failure.

• RollFit™ seal adapts to different face shapes and minimizes pressure on the bridge of the nose.
• TubeFit™ seal zones to help establish a good seal around nasogastric/orogastric tubes.
• ErgoFit™ with easy clips and breathable fabric to help with fitting and adjusting.
• Available in four mask sizes: XS, S, M and L.

Discover Aerogen Solo from Aerogen – a world leader in acute care aerosol drug delivery

Discover how the Aerogen Solo can support aerosol drug delivery at every stage of a patient’s respiratory journey: during invasive mechanical ventilation (IMV) and non-invasive supports such as non-invasive ventilation (NIV), high-flow (HF) therapies and when self-ventilating (SV).

Global market presence in 75+ countries worldwide

Discover Aerogen Ultra from Aerogen – a global leader in aerosol drug delivery

Discover how the Aerogen Ultra – a handheld device – can be used in conjunction with the Aerogen Solo to deliver inhalation treatment either post-ventilation or during exacerbations.

Global market presence in 75+ countries worldwide

Discover Aerogen Pro – a multi-patient use, portable nebuliser that can be sterilised and reused for patients throughout the hospital.

Multiple configuration options

Three ways to configure Aerogen Pro: within a ventilator circuit, with adult and paediatric face masks, and with a mouthpiece

Simple and quiet

Simple to set-up and virtually silent operation, with no added flow required

Multiple therapies

Aerogen Pro is intended to aerosolise physician-prescribed medications for inhalation that are approved for use with a general purpose nebuliser

Infant bubble (CPAP) system control humidifier, full ranges of nasal generator, heater wire circuit, pressure release safety valve.

Complete system for application of continuous positive airway pressure to neonates and infants by nasal CPAP prongs (NCPAP) administered with a heater wire circuit used in conjunction with a continuous flow source suitably.

Moreover, we supply a diverse selection of respiratory care products, including air and oxygen blenders, high flow nasal cannulas, and HFNC accessories.